[Boatanchors] Need help.

[Revcom Electronics]

Ken,

Probably what you need is RG-174 or maybe RG-188,
I have plenty of RG-174 on hand, need address and postage can send some. All
one length or pieces?
RG-188 about same size, touch larger, and is Teflon
dielectric, solders nicer but stiffer and twice as expensive,
have limited supply.

Good source for -short- pieces is the Cell Phone stores,
they have external antenna adaptors for handhelds, they
have about 12" lead of RG-174.  Now most, if like mine,
have surplus cables from phones that are not current and
the adaptors are totally useless execpt for salvage. Whack
off the ends and you have a cable.

Rod
K0EQH

----- Original Message -----
From: "Ken Hickman" <n5cm at rtconline.com>


> Hi Gang,
>
> I am in need of a small piece of very small co-ax. There is some about
1/8"
> outside diameter I know as I salvaged
> some many  years ago from a piece of hospital electronic equipment. I have
> no idea where it is now.
> I need about a foot or 18 inches. If anyone has a piece I'd appreciate
> obtaining it.
>