[Boatanchors] Calibrator

[Al Parker]

Hi folks,
    I thought I had it, too, but looked, and what I've got is originals
for the XC-110, installation instr. on the SP-600, and another set for the
HQ-100 series.  They show 3 different part no.s, PL-38657-G1, "General
Usage", PL-38657-G2, for HQ-129-X & HQ-140-X, and PL-38657-G4, for SP-600.
(don't know what happened to -G3).  I also have a -G1 unit, NIB.
    When I get a round tuit I'll get it all on The Hammarlund Historian
website, w/pix of the unit.  But like you say, Bob, there's no schematic
with any of it.  If anyone has it, I'd appreciate a copy also.
73,
Al, W8UT
New Bern, NC
BoatAnchors appreciated here
http://www.thecompendium.net/radio/
http://www.hammarlund.info

----- Original Message ----- 
From: "RJ Mattson" <rjmattson at hvi.net>
To: "Boatanchors Mail List" <boatanchors at mailman.qth.net>
Sent: Friday, June 17, 2005 7:29 PM
Subject: Re: [Boatanchors] Calibrator


> I have the original 2 page installation pamphlet, but they do not
include a
> schematic.
> It just might be tough to find.
> bob...w2ami
> http://www.qrz.com/callsign/w2ami
>
> ----- Original Message ----- 
> From: "Jim Wilhite" <w5jo at brightok.net>
> To: "Boatanchors Mail List" <boatanchors at mailman.qth.net>
> Sent: Friday, June 17, 2005 2:49 PM
> Subject: [Boatanchors] Calibrator
>
>
> Does anyone have a copy of the FS 135C calibrator diagram made by
> Hammarlund?  Can't find it anywhere.
>
> If so could you scan and email or copy and I will pay postage and copy
> costs.
>
> 73  Jim
> W5JO