[Boatanchors] power cord/connector for R-1524(P)/WRR

[w7fe]

Hi Eugene,

You want the mating plug, MS3106A10SL-3S.  A cable clamp is useful as well, 
Amphenol 97-3057-1004 (their number for the clamp per MS3057).

These are still made by Amphenol per MIL-C-5015, (now probably 
MIL-DTL-5015), one of the oldest connector specs to which connectors are 
still made.  This connector series was designed prior to WWII and was used 
on virtually all military electrical and electronic gear into the 60's. It 
is still specified in some newer applications where a more sophisticated 
connector is unnecessary.

If you want new ones, Allied Electronics shows stock on their site (catalog 
# 714-6567 for the plug, 714-2502 for the clamp), but they are avialable 
from many other distributors as well on the surplus market. They are very 
common.

73 de W7FE


----- Original Message ----- 
From: "Eugene Hertz" <ehertz at tcaf.org>
To: <boatanchors at mailman.qth.net>
Sent: Friday, July 15, 2005 6:11 PM
Subject: [Boatanchors] power cord/connector for R-1524(P)/WRR


> Hello all, recently purchased this item on the e-place.  Looking for a 
> power connector. Manual gives the following designations:
>
> FEDERAL MFG CODE = 96906
> MFG PART NUMBER = MS3102A10SL3P
>
> photos of it can be seen here:
>
> http://www.hertzmail.com/r-1524/
>
> any chance anyone has one? I have also sent a request to Mr Perry, but I 
> thought I'd check the list.
>
> thanks!
> Eugene
>
>
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/boatanchors
> ** List Administrator - Duane Fischer, W8DBF/W9WZE **
> ** For Assistance: dfischer at usol.com **
> $$ For vintage radio info, see the HCI web site $$
> http://www.w9wze.org
>