[Boatanchors] BC-342N Xtal Filter, anybody have one?

Vic Rosenthal vic at rakefet.com
Tue May 25 21:49:19 EDT 2004


Philip Atchley wrote:

> I understand that the BC-342 is supposed to work a little differently than
> other sets with the phasing control, but just don't feel this one is working
> "right".   I can adjust it to a spot where everything, and I DO mean
> everything is nulled out, but that doesn't seem right either.  Otherwise,
> there seems to be NO effect on the overall selectivity that others using
> this receiver report.

What the phasing control does is balance a bridge circuit one leg of 
which is the capacitance of the crystal holder.  So if you are seeeing 
it null everything out, then it seems that you are correct that the 
crystal is not passing anything.  One possibility is that the crystal is 
the incorrect one, having a resonant frequency far from the IF.  You can 
check the crystal with a signal generator and some kind of detector.  Or 
the IF could be misaligned away from the crystal frequency.  Or, as you 
suggest, maybe the crystal is just bad.

> Fresno, you're just down the road from me !  Sure been nice weather lately
> 8^)

Right, now's the time for antenna work, very soon it will be 110 every day.

-- 
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco



More information about the Boatanchors mailing list