[Boatanchors] AmerTran Plate Transformer specs ?

[Chris Howard]

I'm trying to figure out how to wire up this plate
transformer.  The label says:

Plate Transformer
Spec No. 26579    Ser No 368962
Sec test 15000V    Cyc 60
105V Pri   Sec 6200V
type W  KVA 2  Phase 1


On the side with the label (the 'top') it
has four insulator/connectors on one end,
all the same size, arranged in a line.
On the other end of the top there are three
insulator/connectors, two large and one
smaller, arranged in a triangle with the
smaller in the middle, sort of.

I'm thinking the four-in-a-row is the primary
side and the three-in-a-triangle is the secondary.

To use this with 110V AC input, will I need to 
put any jumpers on the primary?  Which of the four
do I connect to?

Thanks!

(yes, I tried a ohm meter,  but the results really
didn't clear things up for me.  All of the four-in-a-row
had very small resistance to all others.)

Chris
kc0atc

-- 
Chris Howard                                     YipYap.Com
chris at yipyap.com                                 Estes Park, Colorado  USA
current Estes Park weather --  http://www.yipyap.com/wscurrent.html