[Boatanchors] Need DX 100 info

[James M. Walker]

125 uF 450VDC and check them before you replace them as after refurbing
8 of the DX-100(*) units I have yet to find one with those caps bad. Unless
you intend to solid-state the power supply, then all bets are off!

Jim
WB2FCN
----- Original Message -----
From: "Anthony W. DePrato WA4JQS" <wa4jqs at mikrotec.com>
To: <Boatanchors at mailman.qth.net>
Sent: Monday, August 30, 2004 1:21 PM
Subject: [Boatanchors] Need DX 100 info


> I have a dx 100 that i am working on for a fellow ham and need to find out
> what the ratings are on the two black paper covered Caps are on the top
> right front side of the unit. have a book coming but thought i would
> replace these while i wait. also anyone have a few  47ohm 2 watt carbon
> resistors.. he put  6146b's in the unit and it took off smoked the
parasitic's.
> thanks
> 73 Tony wa4jqs
>
> _______________________________________________
> Boatanchors mailing list
> Boatanchors at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/boatanchors
> ** List Administrator - Duane Fischer, W8DBF/W9WZE **
> ** For Assistance: dfischer at usol.com **
> $$ For vintage radio info, see the HCI web site $$
> http://www.w9wze.org
>
>