[Boatanchors] DX-100B Bulb

[bobm]

Mark and Others,

Take a piece of black electrical tape about two inches long.  Place the
center of the strip over the portion of the bulb that is visable.....press
firmly. Fold the tape back and place it between the thumb and finger.  Turn
gently while applying presure on the bulb.

Works for me.............

However, old times may use a different color of tape since we seem to always
have them available when looking for a roll of black tape.

Good Luck,

Bob, W4WSZ


----- Original Message -----
From: "Mark Bell" <bell@blazenet.net>
To: "Boatanchors List" <boatanchors@mailman.qth.net>
Sent: Wednesday, March 26, 2003 10:16 PM
Subject: Re: [Boatanchors] DX-100B Bulb


> Thanks for all the replies.
>
> The local Home Despot didn't have any, but the smaller electrical supply
shop
> had 4W units, and they'll do nicely.
>
> The front panel of the 100B is removed, and I'll slip the dial off so I
can put the
> bulb in.   It beats me how you were supposed to do it with the front panel
installed!!
> Guess you needed slender fingers!
>
> 73 Mark
>
>
> --- StripMime Report -- processed MIME parts ---
> multipart/alternative
>   text/plain (text body -- kept)
>   text/html
> The reason this message is shown is because the post was in HTML
> or had an attachment.  Attachments are not allowed.  To learn how
> to post in Plain-Text go to: http://www.expita.com/nomime.html  ---
> _______________________________________________
> Boatanchors mailing list
> Boatanchors@mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/boatanchors
>
>
>