[Boatanchors] Millen 90672 Ant Bridge

[RJ Mattson]

Jeffrey
LOOPS:
Large Black < 12 mhz  (measured 6.8 uH)
Large White > 12 < 40 mhz (measured  0.6 uH)
Small black > 40 mhz (measured  0.0uH) 

The large white is the same size as the large black.
I could measure the uH of the two larger loops but the smaller 1-1/8"od
black loop must only be one turn and out of the range of my L-meter. 

Hope this helps - let me know.
bob...w2ami

----- Original Message ----- 
From: "Jeffrey W Harshman" <n2lxm@juno.com>
To: <boatanchors@mailman.qth.net>; <forsale-swap@mailman.qth.net>
Sent: Tuesday, August 26, 2003 4:28 PM
Subject: [Boatanchors] Millen 90672 Ant Bridge


> Greeting's All,
> 
> 
> I have been given a Millen Antenna Bridge by a very good friend. I have
> downloaded the manual from the BAMA Web site but I do have a question.
> The manual indicates that there are three(3) Rf Pick up coils, I guess
> these are for different freq bands. The bridge came with one which is
> Black in color and has an OD 1 5/8" , can anyone tell me what freq this
> will cover. Also if anyone has a set of Pick Up Coils for this bridge and
> wants to get rid of them by all means contact Me. This is going to make a
> find addition to My Millen 90651 GDO.