[Boatanchors] INSTANT NUT STARTER

[W4AWM@aol.com]

Take an old test probe and heat the end with a heat gun (carefully) or a hair 
drier. Push it down over the nut and let it cool.  Remove the nut with a 
mating screw if necessary and voila!  You can also use it for smaller nuts by 
inserting the smaller nut while the probe is hot and squeezing it to size.  
Be careful not to burn your fingers.

73, 

 John,  W4AWM


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment. Attachments are not allowed.
Please post in Plain-Text only.---