[Boatanchors] RE: T-368 Power Plug

Wed, 28 Aug 2002 14:15:14 -0700 (PDT)

Try Fair Radio, talk to Phil!

If they don't have it you'll have to find a Hubble
catalog and someone who will order one for you,.......
good luck, better hope Phil still has some.

BUT, what I did on mine was to remove the original
plug and replace it with a 1 1/4" X 3/4" plumbing
reducer held in place with a 1 1/4" electrical lock
nut for rigid conduit, that is a STEEL lock nut.  Then
I used what's called a Kellem grip for strain relief
on the 10/3 cord.  That way I have a dedicated ground
conductor attached firmly to the cabinet and the shack
power grounding system.

Some versions of the T-368 will draw 21 amps on
transmit so a 20 amp circuit is just not enough, go 30
amp/10 gauge wire all the way to the panel.

Joe KG2CI

PS: Are you on the T-368/BC-610/HT-4 mailing list?

--- William Kipping <[email protected]> wrote:
> 
> Hi to all.  Looking for the AC power plug for the
> T-368 transmitter. 73 Bill
>    [email protected] 
> 
> _______________________________________________
> Boatanchors mailing list
> [email protected]
> http://mailman.qth.net/mailman/listinfo/boatanchors

__________________________________________________
Do You Yahoo!?
Yahoo! Finance - Get real-time stock quotes
http://finance.yahoo.com