[Boatanchors] Re: [Milsurplus] Wanted
Glenn Little
[email protected]
Wed, 31 Jul 2002 23:20:09 -0400
Be advised that there are 50 Ohm and 75 Ohm Type N connectors. If you plug
a 50 Ohm male connector into a 75 Ohm female connector, you will damage if
not destroy the female connector. If you plus a 75 Ohm male into a 50 Ohm
female you will probably not get a connection. I found this out the hard way.
I am not sure, but, possibly the same situation exists with the C connector.
73
Glenn
WB4UIV
At 07:50 PM 7/31/02 -0700, [email protected] wrote:
>I'm looking for some connectors/cables. Connectors are "N" male and
>"UHF" female. Or some cables with "N" male connectors on one end and
>UHF/PL-259 types on the other end.
>
>Next, either "C" male to "UHF" if they make that one or some cables with
>male "C" connectors on one end. Would like to find either arrangement
>with 70 ohm cable if possible. 50 ohm stuff provides a bit of mismatch
>but i (nor the receiver) would ever say anything and i know i'd never
>hear the difference.
>
>Larry
>_______________________________________________
>Milsurplus mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/milsurplus
---------------------------------------------------------------------------
Glenn Little [email protected] QCWA LM 28417
Amateur Callsign: WB4UIV [email protected] AMSAT LM 2178
QTH: Goose Creek, SC USA (EM92xx) ARRL TAPR
---------------------------------------------------------------------------