[Azden] Accessories for Azden PCS-300 and other HTs FS

Thu Nov 18 19:45:45 EST 2010

Accessories for the Azden PCS-300 and other HTs For Sale:

Azden SDX-316
This is the rounder style speaker mic that fits nicely in
the palm of your hand. Has 3.5 mm and 2.5 mm plugs for
Azden, Icom, some Yaesu, and others. It works great, and
looks great also. $20

Battery charge adapter for Azden PCS-300 HT
This is an adapter that permits one to charge the battery
of the Azden PCS-300, 2 meter HT, outside of the HT itself.
Usually, one must have the battery inside the HT, but this
lets you charge a second battery outside of the HT. The
original charger is used. If you have a PCS-300 HT, you
need this adapter.
It works fine, and looks like new. $3

Antenna adapter - BNC on HT to SO-239
This adapter will fit the BNC connector on the HT and
provide an SO-239 connector that will permit a PL-259 to
be attached. This adapter can be used on any HT with a
BNC connector. $5

Accessories for Kenwood TH-205, TH-215, TH-225, TH-415,
and other HTs in this series:

Kenwood SC-13 Vinyl Case
For TH-215, TH-225 and others, with room for the larger
PB-1 and PB-4 battery packs. It can also be used with
the smaller PB-2 and PB-3 packs. Black color. Great
condition. $15

MFJ-287 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits
the TH-21/31/41 series HTs, TH-215, TH-415, as well as
others. It has a 3 conductor 3.5 mm plug and a 2 conductor
2.5 mm plug. Coiled cord is somewhat stretched, but works
fine. $12

Kenwood Wall Wort Charger for PB-2. $12

Kenwood BH-2 Belt clip with screws
Used on many Kenwood HTs. $8

Kenwood Wrist Strap for TH-215, plus many other HTs. $4

Original Kenwood Rubber Duck antenna from Kenwood TH-215. $10

Antenna adapter to fit the BNC connector on the HT
and provide an SO-239 connector that will permit
a PL-259 to be attached. (BNC male to UHF female) $5

Accessories for the Kenwood TR-2400 HT:

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and others. This one looks fine
and works fine. $18

Antenna adapter to fit the BNC connector on the HT and provide
an SO-239 connector that will permit a PL-259 to be attached.
This adapter can be used on any HT with a BNC connector. $5

Belt clip for TR-2400 HT, complete with hardware - $8

Wrist strap for TR-2400, and most other HTs - $4

Battery charge cable for Kenwood TR-2400 HT
This is an adapter that permits one to charge the battery of the
Kenwood TR-2400, 2 meter HT, outside of the HT itself. Usually,
one must have the battery inside the HT, but this lets you charge
a second battery outside of the HT. The original charger is used.
It is in good shape, and works fine. $3

Santec HT Accessories:

Leather Case for Santec HT
This is a real Bianchi Leather case -- not a vinyl case.
It fits most of the Santec HTs, such as the HT-1200,
ST-142, ST-144, ST-440, etc. The real leather case
includes a built in belt clip, plus a removable leather
shoulder strap.
The case itself is in very nice shape. The leather
shoulder strap has not been used. $25

Santec ST-142/144 "Service Pack"
This is similar to a service manual, but Santec calls it a
service pack. It has schematics, circuit explanations,
voltages, etc. $18

Speaker Microphones:

Icom HM-70 Speaker Microphone
The Icom HM-70 speaker mic (also known as the EX-1036)
works on the Icom 2SRA, 4SRA, Delta 1, IC-W2/X2 or any
Icom HT which uses the single 3 conductor stereo-style
1/8 inch (3.5 mm) plug.
This one is in the original box, and appears to be unused.
$25

MFJ-287 Speaker Microphone
This was used on a Kenwood TH-225 HT, but it also fits
the TH-21/31/41 series HTs, TH-215, TH-415, as well as
others. It has a 3 conductor 3.5 mm plug and a 2 conductor
2.5 mm plug. Coiled cord is somewhat stretched, but it
works fine. $12

Kenwood SMC-24 speaker microphone
Fits Kenwood TR-2400 HT and others. This one looks fine
and works fine. $18

Azden SDX-316
This is the rounder style speaker mic that fits nicely in
the palm of your hand. Has 3.5 mm and 2.5 mm plugs for
Azden, Icom, some Yaesu, and others. $ 20

Rubber Duck antennas for your HT:
All are for 2 meters, are in good condition,
and are $10 each, unless stated otherwise.

BNC - Original from Kenwood TH-215 HT, 5 inches long

5/16 inch threaded, like used by Motorola and others
Stubby - 4 inches long

Type F connector - 6.5 inches long

PL-259 connector - 6.5 inches long
HyGain 275, still in original packaging

PL-259 connector - Stubby - 4.6 inches long
Centurion, still in original package

Special for Kenwood TH-21 HT threaded connector
Kenwood RA-6 regular, 6.6 inches long - $15

BNC Stubby for 440 MHz, 3 inches long

Belt Clips:
All include the hardware with the belt clip and are $8 each.
Kenwood BH-2 for Kenwood TH-215 / 225 / 415, etc.
Kenwood BH-3 for Kenwood TH-21 / 31 / 41 series HTs
Kenwood TR-2400
Motorola
Yaesu FT-207

Wrist Straps for various HTs - $4 each
Kenwood TH-215 / 225 / 415, etc.
Kenwood TR-2400
Yaesu FT-209

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone  (352) 732-8400

__________ Information from ESET NOD32 Antivirus, version of virus signature database 5631 (20101118) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com