[Azden] Mic Pins needed for 2000

[Keith Marshall]

Ed,

I need to confirm on pin if you do not mind.

The PTT on the 2000.

You say it is the same as the 3000 that Joe posted, yet you also state that
it is Pin #4 on the 2000 and on the drawing of the 3000 it is listed as Pin
#9

On the 2000 do I want to wire my PTT wires to Pins 4(+) and 2(-) OR 9(+) and
2(-)?

Also can you tell me if the 2000 input is resistive, capacitive, or direct
coupling?

I am using a Computer Soundcard interface rather then a TNC and need to know
what size Capasitor to put into the line.

Thanks again for your help :)

Keith
KD7PKY

----- Original Message ----- 
From: <ma.locksmith@juno.com>
To: <azden@mailman.qth.net>
Sent: Sunday, March 07, 2004 6:02 AM
Subject: Re: [Azden] Mic Pins needed for 2000


> While the connectors are identical, some of the connections are not.  For
> the 2000, the mic is on pin 12 and the mic common is on 11.....  same as
> 3000.  PTT is on pin 4......  same as 3000  PTT ground is on pin 2.....
> same as 3000.