[Argonaut_USERS_Group] Vintage TenTec filter FS

[Ken Simpson, W8EK]

For Sale:

TenTec FR-4 vintage audio filter

I think this filter was made to go with the early PM series
of TenTec gear.  It is in a TenTec JW-5 enclosure, which
is the Walnut woodgrain and eggshell white color, the same
as the early Triton I and IIs and the Argonaut 505/509.  This 
filter is a passive filter, with an "In-Out" switch on the front
panel, and a pot to control the bandwidth, which is labeled
"Min - Max".  There is a quarter inch headphone jack on the
front for output, with a 2 foot long cable for input coming out 
the back.

Inside, it has several toroid coils and mylar capacitors.  No
power is needed.  Although it may have been designed for 
the PM series, there is no reason that it can not be used in 
the audio circuit of any rig.  I would think it would function 
very well with an Argonaut. 

This particular unit works fine and is in very nice physical 
condition.  There is one very small scratch on the bottom, 
that would not be visible in normal use.

$40 plus shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at speakeasy.net or W8EK at arrl.net
Voice Phone  (352) 732-8400