[AReU] Equipment for sale

[w4tas]

Equipment for sale. 
I have a couple of Boonton RF power meters (one digital 
and one analog). I have two low frequency sensors and a 
10 MHz to 10 GHz sensor for the Boonton units. 
The low frequency probes were repaired by me and are 
perfectly good to 0.6 GHz but are not accurate above that. 
Originally they were good to 1.2 GHz. The 10 GHz sensor is 
AOK. It was tested up to 10.368 GHz and agrees with other 
power meters good to 18 GHz. 

I also have an HP 432 meter with power cable, 
thermistor mount and sensor cable. It is complete 
and works well. The thermistor mount is good from 10 MHz 
to 10 GHz and I have confirmed that it is accurate to 10.5 GHz 
for the amateur 3 cm band. 

I also have a couple of HP 435 meters without sensors or 
sensor cables and a couple of HP 436 meters without 
sensors or sensor cables. These units do have power cables. 

I also have an HP 8481D sensor with an HP 11708A 
attenuator and the sensor cable that can be used with 
either the HP 435 or HP 436 meters. This sensor is good 
from 10 MHz to 18 GHz and –70 to –20 dbm. The HP 11708A 
attenuator is used to calibrate the sensor from the 0 dbm 
reference signal on the HP 435 and HP 436 power meters. 

I only want my investment back on this equipment 
so I can purchase some more microwave junk. 

I can supply complete specs, costs and photos if 
anyone is interested. I can also supply complete 
manuals on electronic file for the above equipment. 

Tony 
W4TAS