Received two pairs of the subject headset cushions.  Unfortunately, they will NOT work with either the ANB or R-14 elements (HS-33 and HS-23) as the diameter of both the MIL elements are only 2".  The cushions need at least 2 1/4" to be secured.  If one could fabricate a thin adaptor ring, 2" inside and 2 1/4" outside diameter they would arguably be OK.  They will work, as Dave indicated, with the older H-13 headsets and, in fact, make them ever so much more comfortable. So, did not waste a few bucks!

Jeep K3HVG

On 01/20/2026 6:16 AM EST David Stinson <arc5@ix.netcom.com> wrote:

 

 

Thanks for that tip!

On 1/18/2026 12:57 PM, Dave Merrill wrote:

Hello group,

 

I got these on Amazon for my JBL 500BT Headphones and found that they also worked well with any headset with 2-1/4" diameter receivers. Photo is of a pair in place on a HA-16A.

Much more comfortable than the original hard rubber or chamois types. They go on easily without any struggle. And they come in colors other than black if you are so inclined.

 

https://a.co/d/ffL1fhD

 

Four for $10 is certainly a bargain.

 

__... ...__ Dave N9ZC 

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html