On Sunday, September 7, 2025, 12:22 PM, [email protected] wrote:

On 7 Sep 2025 at 8:43, Dennis Monticelli wrote:

>
> Less gain is the biggest thing you will notice.  You can mitigate that by adjusting the
> screen voltage divider (just short a resistor as I recall).

No. Not "short". Move one wire from the junction between the two vertically mounted wire
wound resistors in the rear of the receiver to the hot end. One end of that pair is the "hot" end
and the other end is grounded. Doing so makes a huge improvement in sensitivity and other
good effects at low plate voltages.

>  I have run 60 to 70V
> satisfactorily (from 9V batteries) and still had enough audio for driving a speaker.
>
> Dennis AE6C

Ken W7EKB

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html