>>Would this be a strong sign that the original chassis wiring in the receivers definitely needs replacement?

Absolutely not!   Here's the section on Dynamotor Noise from an ATA ARA manual (which will directly apply to the SCR-274N).

image.png
image.png

You can try the suggestion from TIm N6CC;  sometimes this works, sometimes not.

73 Mark K3MSB

On Sun, Aug 24, 2025 at 9:36 PM Matt P <mgpaulonis@gmail.com> wrote:
Getting closer. I completely cleaned and lubed the bearings of two command receiver dynamotors and get overpowering dynamotor noise in the audio. All three receivers have new caps and work just fine with an outboard power supply with 24 V AC on the LV and 60 VDC on the HV when not plugged into the rack. Would this be a strong sign that the original chassis wiring in the receivers definitely needs replacement?

Matt
W2NS
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html