Send ARC5 mailing list submissions to
To subscribe or unsubscribe via the World Wide Web, visit
or, via email, send a message with subject or body 'help' to
You can reach the person managing the list at
When replying, please edit your Subject line so it is more specific
than "Re: Contents of ARC5 digest..."
Today's Topics:
1. Re: Command Set Dynamotor Studs (Mark K3MSB)
----------------------------------------------------------------------
Message: 1
Date: Fri, 1 Aug 2025 21:17:40 -0400
Subject: Re: [ARC5] Command Set Dynamotor Studs
Message-ID:
Content-Type: text/plain; charset="utf-8"
Many thanks for the replies I received.
A tip of the hat to Brian VK2GCE who suggested that I use chassis
grommets! They worked great! I used 7/16 inch grommets. Installation
was easy; clean out the old material and install the grommet. If the fit
is correct, the stud will easliy rotate within the grommet.
[image: image.png]
73 Mark K3MSB
> I'm currently working on recapping my BC-453B Nav Receiver.
>
> The Studs which the dynamotor base clamps lock onto are rotted and are not
> useable.
>
> [image: image.png]
>
> Can anything be done about this?
>
> This is not a critical issue for me as I do not use dynamotors with my
> Command sets; Even with additional bypass capacitors and more grounding,
> the noise is not palatable to my ears.....
>
> 73 Mark K3MSB
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 713953 bytes
Desc: not available
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Desc: not available
------------------------------
_______________________________________________
ARC5 mailing list
End of ARC5 Digest, Vol 259, Issue 1
************************************