Thanks, Mark.  i just finished staring at the mice-type in my RBM-5 book and came up with the same number; thanks again for confirming it!

73

Mike WA4DLF

On Thursday, November 7, 2024 at 09:25:10 PM EST, Mark K3MSB <mark.k3msb@gmail.com> wrote:

From the RBM-5 manual:

Navy Type number 49171

Contractor's Drawing and Part Number:  P-7708342 P4

If this helps.....

Mark K3MSB

On Thu, Nov 7, 2024 at 8:33 PM Hubert Miller <Kargo_cult@msn.com> wrote:

If there is a RUGF equivalent, please give me that number and i’ll have a look.

-Hue Miller

 

From: arc5-bounces@mailman.qth.net <arc5-bounces@mailman.qth.net> On Behalf Of Mike Everette via ARC5
Sent: Thursday, November 7, 2024 5:13 PM
To: arc5@mailman.qth.net
Subject: [ARC5] Connector needed

 

I'm trying to get an RBM-5 receiver up and running, and need a power connector for it.  This is similar to the connectors used with the GF/RU radios; it is an 8 pin female roughly an inch and a quarter in diameter.   A picture is attached.  If you have one of these in excess of your needs, please let me know and what you'd like for it.

 

Thanks in advance! 

 

73

 

Mike WA4DLF

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html