BTW, if you need these 3-48 slotted plated brass screws, they are available in both black and nickel from McMaster-Carr.

 

Scott W7SVJ

 

From: [email protected] <[email protected]> On Behalf Of hwhall--- via ARC5
Sent: Saturday, April 20, 2024 17:00
To: [email protected]; David Stinson <[email protected]>
Subject: Re: [ARC5] SCR-274 series screws question

 

Hi, Dave!  The screws I'm looking at are all the externally visible ones, when everything is assembled.  They don't appear to have been put on randomly -- the darker ones I've noticed so far are only those securing that "top cover" underneath the rim of the front panel plate (the top cover has slots to allow removal of the cover without fully extracting the darker screws).  It looked like they might have been deliberately done.  But if it's likely not original, then I don't have to consider whether to have darker screws at the ready.

 

Wayne

WB4OGM

 

On Saturday, April 20, 2024 at 05:40:44 PM MDT, David Stinson <[email protected]> wrote:

 

 



On 4/20/2024 6:10 PM, hwhall--- via ARC5 wrote:
> Some of the SCR-274-N receiver sets I'm working with have silver colored
> screws in some exterior places & darker colored (almost black?) screws
> in other exterior locations...


If you remove the top cover of a 274N (or ARA, ARC-5)
  receiver, you see an internal shield over the tuning
capacitor.
The black screws bypass the top cover and screw
into receptacles holding this internal shield in place.
By removing just the "silver" screws, you can pull
the top cover without disturbing the internal shield.
Receivers which have been disassembled and reassembled
are often put back together with mixed screws.

GL OM ES 73 DE Dave AB5S




--
This email has been checked for viruses by Avast antivirus software.
www.avast.com


______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html