Hmm...nine mils greater than 3/4"?

Sent from an iThing, so please forgive the terseness and typos.

On Nov 18, 2021, at 10:27 AM, Tim <[email protected]> wrote:

Hi Steve - correction on the "pre-coffee" ! spacing measurement:  This DC-11-E crystal example is just slightly over 3/4" spacing.   (0.759")
Pins are 0.125 diameter...
Tim
N6CC

On Thu, Nov 18, 2021 at 7:50 AM Steve WD8DAS via ARC5 <[email protected]> wrote:

Thank you Tim!  7/8" spacing is one of the dimensions I've seen reported. 

Last night I finally found one DC-11A crystal in my stash and the pins were the same 1/8" as yours but the spacing was closer to 3/4" (but did not seem to be exactly 3/4, so maybe it is 13/16? 


--------------------------------------------------------------------
Radio is your best entertainment value.
--------------------------------------------------------------------


______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html