[ARC5] SCR-522 Connectors

[scottjohnson1 at cox.net]

Many times, I just partially insert the connector in the socket and try to remove the spanner nut by hand- works about half the time, otherwise fabricating a spanner from a piece of scrap metal take about 5 minutes on a bench grinder.  I did finally buy an adjustable spanner.  Many English connectors require the use of spanner wrenches for assembly/disassembly.  Would these be referred to as “spanner-spanners” in the UK?😉

 

 

Regards,

 

Scott V. Johnson W7SVJ

 

 

From: arc5-bounces at mailman.qth.net <arc5-bounces at mailman.qth.net> On Behalf Of Steve Williams via ARC5
Sent: Friday, May 15, 2026 1:46 PM
To: Michael Hanz <aaf-radio-1 at aafradio.org>
Cc: ARC5 <arc5 at mailman.qth.net>; List Milsurplus <milsurplus at mailman.qth.net>; Military Radio Collectors Association (mrca at mailman.qth.net) <mrca at mailman.qth.net>
Subject: Re: [ARC5] SCR-522 Connectors

 

The square notches are for a spanner wrench. If you have one, plug it into a mating socket, clamp it in a vice, then carefully use what ever pliers you have to back out the notched ring mentioned above. On connectors that are this old, a little releasing liquid can't hurt, along with some gentle tapping around the edges. Patients and gentleness is the key.

Steve

KC4WN

 

On Fri, May 15, 2026, 2:19 PM Michael Hanz via ARC5 <arc5 at mailman.qth.net <mailto:arc5 at mailman.qth.net> > wrote:

Well, you are supposed to use a spanner wrench, but only nuts like me 
buy them (from my engine building days, mostly).

You could also use a screw driver and tap gently on the handle end with 
the driver end planted in one of the four gaps.  You should cushion it 
with a gum wrapper or similar.  It shouldn't take much to break it loose.

- Mike

On 5/15/2026 1:03 PM, Mark K3MSB wrote:
> Yup… I see it now…. page 20 and 21.    Also in the Table of 
> Contents…..   Duh…..
>
> I have two of them apart.    I tried using pliers but the grip wasn’t 
> good enough.  I thought about using a vice but that leads to obvious 
> dangers…..
>
> Thanks Mike.
>
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net <mailto:ARC5 at mailman.qth.net> 

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20260515/ad49bde0/attachment-0001.html>