[ARC5] Dynamotor Pin Repair

[hwhall@aol.com]

FWIW, I received the minibanana pins from the ebay seller I'd mentioned.  Unfortunately, they're not the pins that would work in a dynamotor connector. Instead, they're like the pins in the various cable connectors.

Wayne
WB4OGM

----- Forwarded Message -----

From: hwhall at aol.com <hwhall at compuserve.com>
To: Mark K3MSB <mark.k3msb at gmail.com>
Sent: Monday, May 12, 2025 at 01:13:38 PM MDT
Subject: Re: [ARC5] Dynamotor Pin Repair

Yeah, it lost it's banana peels. :-)
You might try these. I have some on order to see how they look compared up close to the other minibanana pins in my SCR-274-N & ARC-5 stuff. He also has the female ends for those.
https://www.ebay.com/itm/226725485116

Wayne
WB4OGM

On Monday, May 12, 2025 at 07:44:59 AM MDT, Mark K3MSB <mark.k3msb at gmail.com> wrote: 

As can be seen in the following photo, one of the pins for a dynamotor is damaged.

How have you fixed such a damaged pin?   I thought of putting a tiny amount of aluminum foil in the dynamotor base for adequate contact....

73 Mark K3MSB