[ARC5] [Milsurplus] Dynamotor Pin Repair

[David Stinson]

Look in the female socket on the dynamotor and see
if the missing part of the pin is in there.  If not,shake
the dyno and see if that piece is rattling around in the
mounting base space.

Going out to The Cave to see if I can find
the parts to illustrate how to fix this.
Dave S.


On 5/12/2025 8:44 AM, Mark K3MSB wrote:
> As can be seen in the following photo, one of the pins for a dynamotor 
> is damaged.
>
> image.png
>
> How have you fixed such a damaged pin?   I thought of putting a tiny 
> amount of aluminum foil in the dynamotor base for adequate contact....
>
> 73 Mark K3MSB
>
> ______________________________________________________________
> Milsurplus mailing list
> Home:http://mailman.qth.net/mailman/listinfo/milsurplus
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:Milsurplus at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20250512/6a0b21bc/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image.png
Type: image/png
Size: 171843 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20250512/6a0b21bc/attachment-0001.png>