[ARC5] CBY-46145 and BC-946B Update

[Bob Groh]

I agree with Ken Gordon - at most do an electrical realignment. Basically a
'don't muck with it' approach.

Bob Groh, WA2CKY

On Mon, Apr 14, 2025 at 11:21 AM Ken Gordon <kgordon2006 at frontier.com>
wrote:

> On 14 Apr 2025 at 11:20, MARK DORNEY wrote:
>
> > I would first remove the dial on the radio and then reinstall it back
> > on the radio, but put it on so it reads the correct frequency. No
> > sense in getting into the weeds if you don´t have to.
> >
> > Mark D.
> > WW2RDO
>
> Mark:
>
> The dial is "pinned" and cannot be easily moved as you suggest.
>
> Alignment of the radio is actually very easy, but the top cover must be
> removed.
>
> Also, I didn't see it being as far off as someone else thought: it looked
> to
> me to be only off about 250 Hz. The station Mark was listening to was at
> 700 kHz, and the dial was reading only a bit low.
>
> Ken W7EKB
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20250414/56920ff2/attachment-0001.html>