[ARC5] Connector needed

[Mark K3MSB]

 From the RBM-5 manual:

Navy Type number 49171
Contractor's Drawing and Part Number:  P-7708342 P4

If this helps.....

Mark K3MSB

On Thu, Nov 7, 2024 at 8:33 PM Hubert Miller <Kargo_cult at msn.com> wrote:

> If there is a RUGF equivalent, please give me that number and i’ll have a
> look.
>
> -Hue Miller
>
>
>
> *From:* arc5-bounces at mailman.qth.net <arc5-bounces at mailman.qth.net> *On
> Behalf Of *Mike Everette via ARC5
> *Sent:* Thursday, November 7, 2024 5:13 PM
> *To:* arc5 at mailman.qth.net
> *Subject:* [ARC5] Connector needed
>
>
>
> I'm trying to get an RBM-5 receiver up and running, and need a power
> connector for it.  This is similar to the connectors used with the GF/RU
> radios; it is an 8 pin female roughly an inch and a quarter in diameter.
>  A picture is attached.  If you have one of these in excess of your needs,
> please let me know and what you'd like for it.
>
>
>
> Thanks in advance!
>
>
>
> 73
>
>
>
> Mike WA4DLF
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20241107/39518241/attachment-0001.html>