[ARC5] Command Set Dynamotor shocks wanted

[Brian Clarke]

Hello Wayne,
There were at least two kinds: for one type, there was a threaded
'nut' rivetted to the chassis; the other type went into a plain hole
and required a nut underneath. To fit the second kind, you need to
displace the four rear potted components - quite a pain.
I've found that rubber, or the later silastic, grommets can replace
the usually by now, perished rubber. Add a little acid-free silicone
glue.
If you can't remove the perished rubber from the outer cages, I may be
able to help with refurbished ones.

73 de Brian, VK2GCE

----- Original Message -----
From: "hwhall at aol.com" <hwhall at compuserve.com>
To:"ARC-5 List" <arc5 at mailman.qth.net>, "Milsurplus Listserv"
<milsurplus at mailman.qth.net>
Cc:
Sent:Sun, 23 Jun 2024 02:22:09 +0000 (UTC)
Subject:[ARC5] Command Set Dynamotor shocks wanted

I'm looking for some Command Set receiver (ARC-5 or SCR-274-N)
dynamotor shock mounts that still have serviceable rubber in them.
Probably will need two sets before very long.  Will consider taking
on complete decrepit chassis for the parts.  I'd also be interested
if anyone has seen a way to replace the rubber in those
mounts.Thanks!WayneWB4OGM
-------------------------
Email sent using Optus Webmail
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20240623/71e2f2ac/attachment-0001.html>