[ARC5] Resistor Excursions

[Dennis Monticelli]

FYI.  I went through all the unusual looking R's in my N and found all to
be high.  It ranged from 10% (no biggie) to 60%.  Naturally the higher
values drifted the most.   Further if those same R's were to be tested over
temp I would be surprised if they still met original temco specs.  I bet
the higher value ones also drift quite a bit from cold start to final
cabinet temp.

Dennis AE6C

On Mon, Apr 8, 2024 at 12:03 PM <releazer at earthlink.net> wrote:

> Well, after going through almost all of the resistors in the Bc-348-N I am
> working on, I have at last found ONE that is significantly LOWER than its
> specified value.  The wiring diagram, schematic, and the resistor's color
> code shows it to be about 185K when it should be 1 Megaohm.  There must be
> too many Mhos in the circuit!
>
> Wayne
> WB5WSV
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20240408/d5b8c087/attachment-0001.html>