[ARC5] 3-48 Screws from McMaster-Carr for ARC-5

[scottjohnson1 at cox.net]

How about Aquadag resistors and silver paint/ Krylon/silver paint
capacitors?

I did this several years ago with a summer science program and is worked
reasonably well,
Made a phono oscillator that kinda worked.
Scott W7SVJ
-----Original Message-----
From: arc5-bounces at mailman.qth.net <arc5-bounces at mailman.qth.net> On Behalf
Of Hubert Miller
Sent: Saturday, May 20, 2023 13:29
To: ARC-5 <ARC5 at mailman.qth.net>
Subject: Re: [ARC5] 3-48 Screws from McMaster-Carr for ARC-5

I must have a variation of the Trans-Midge radio because i didn't note
"excellent selectivity and remarkable sensitivity" and i looked in vain for
features that were "Feature Packed". It is however, really cute, and
fortunately this one is not soldered with glue. 

The conductive glue topic interests me quite a bit so i'm going to order 3
varieties just to play with, see what they're like. The PSARA antique radio
club in Seattle was having a "crystal set building contest" and i kind of
thought a crystal radio "printed" on one sheet of paper might be fun. It
would have a spiral coil and wiring drawn on the page with conductive ink,
with i suppose taps for so-called tuning. But i have enough other pressing
concerns right now, so this one will stay on the drawing board. But i still
am going to try out the conductive ink and glue. 
-Hue Miller
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html