[ARC5] Tuning Knob

[Robert P. Meadows]

You are quite correct, some goober with access to a lathe did it.  The marks
and shape are the tell.  
R

-----Original Message-----
From: arc5-bounces at mailman.qth.net <arc5-bounces at mailman.qth.net> On Behalf
Of Brian Clarke
Sent: Sunday, October 31, 2021 9:34 PM
To: 'Adam Castellani' <adamcastellani at yahoo.com>; arc5 at mailman.qth.net
Subject: Re: [ARC5] Tuning Knob

No chemist / physicist would put brass and aluminium together; hence, not a
production item.
So, probably after market, home made. Possibly a once-off.
73 de Brian, VK2GCE

-----Original Message-----
From: arc5-bounces at mailman.qth.net [mailto:arc5-bounces at mailman.qth.net] On
Behalf Of Adam Castellani via ARC5
Sent: Monday, 1 November 2021 10:24 AM
To: arc5 at mailman.qth.net
Subject: [ARC5] Tuning Knob

Good evening. Cannot seem to find much background on this unmarked tuning
knob:

https://i.imgur.com/QVVtDVv.png

Curious when these were made and by whom? 

Thank you kindly for any detail and regards.
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html