[ARC5] DC11 or DC11AA crystal holder dimensions?

[Tim]

Hi Steve - correction on the "pre-coffee" ! spacing measurement:  This
DC-11-E crystal example is just slightly over 3/4" spacing.   (0.759")
Pins are 0.125 diameter...
Tim
N6CC

On Thu, Nov 18, 2021 at 7:50 AM Steve WD8DAS via ARC5 <arc5 at mailman.qth.net>
wrote:

>
> Thank you Tim!  7/8" spacing is one of the dimensions I've seen reported.
>
> Last night I finally found one DC-11A crystal in my stash and the pins
> were the same 1/8" as yours but the spacing was closer to 3/4" (but did not
> seem to be exactly 3/4, so maybe it is 13/16?
>
>
> Steve WD8DAS
>
> sbjohnston at aol.com
> http://www.wd8das.net/
> http://af4k-crystals.com
> --------------------------------------------------------------------
> Radio is your best entertainment value.
> --------------------------------------------------------------------
>
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20211118/06722d0e/attachment-0001.html>