[ARC5] solid state vibrator basics

[Bob Groh]

I second Mike's thanks - I captured the details on my computer for future
use.

73
Bob Groh, WA2CKY

On Mon, Feb 8, 2021 at 6:29 PM J Mcvey via ARC5 <arc5 at mailman.qth.net>
wrote:

> This not specific for your vibrator, but the concept works for any of
> them, you just have to wire to the correct pins for your particular type.
>
> The synchronous contacts ( if any) are replaced by rectifier diodes ( in
> the correct polarity , of coarse).
>
> The oscillating frequency is approx 110 Hz
>
> I used BUZ11 mosfets with good results.
>
> The zeners can all be adjusted to 12V , since the mos gates are good to
> 20V and the 4047 is 18v max.
>
>
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20210208/4ab11e32/attachment.html>