[ARC5] TBW-4 and Rectifier Modulator Unit

[Mark K3MSB]

Hi Everyone.

As some of you know, I have a TBW-5 on the air.  The 803 was converted to
an 813 decades ago and I was recently searching for the correct socket to
replace the 813 with an 803.

During that process I was contacted by an individual that had a TBW-4 and
Rectifier Modulator unit.   To make a long story short,  I am excited to be
the new owner of both these units.   And, the TBW-4 came with the transmit
case!  I've attached a few photos.

The TBW is stock except for the antenna terminals which have been replaced
with SO-239's.   All connectors on the bottom of the radio are intact.

The Rectifier Modulator unit is also stock except that the main plate
transformer and the filament transformer are gone.   Since they are 800Z
that's not a big deal.   All connectors on the bottom of the RMU are intact.

73 Mark K3MSB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20210817/a56cc4cc/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210808_162842.jpg
Type: image/jpeg
Size: 1692329 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20210817/a56cc4cc/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: 20210808_170525.jpg
Type: image/jpeg
Size: 2384021 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20210817/a56cc4cc/attachment-0003.jpg>