[ARC5] First QSO 55 Years Ago

[kn7sfz]

Great story Gene....similar to many of us.Â

My first contact was during lunch hour at noon, as I'd just received my 
license and was nervous as all get out.  My mom came into the room and 
had a fit, as I was late back to school...ha!  I was 15.

Please fix the photobucket link on your qrz.com page so we can see you  
pics!

Richard kn7sfz


On 4/11/2021 3:27 PM, Gene Smar via ARC5 wrote:
> Gents:
>
>       Today is the 55th anniversary of my first QSO.  I was 14 at the time.
> It was Easter Monday 1966 and I had spent all weekend trying to get a silly
> antenna from Pop Electronics working on 80 and 40 meters.  The antenna was
> two sections of EMT mechanically coupled together (that was the first
> problem) and then connecting to two sets of guy wires at the top that were
> supposed to bring the array into resonance on 80 and 40 M.  I think I used a
> Coke bottle (remember them?) as a base insulator but used a heavy cardboard
> mailing tube to "insulate" the first couple of feet of EMT from the mounting
> bracket that was lag bolted into the back yard wooden fence.  I tried to
> solder the coax center conductor to the base of the EMT (second big
> problem.)  I also bolted the twisted coax shield to an aluminum clothes line
> prop (not sure how many of you even know what that is) that I had "borrowed"
> from my mother and driven into the dirt aside of the Coke bottle.
>
>       I won't bore you with details of my first two pages of logbook entries.
> Suffice it so say that they were filled with identical entries of "CQ"
> followed by "NO QSO," all on the same 7 MC freq of my sole 40M Novice band
> crystal.
>
>       On that Monday morning (a school holiday) I decided to reconfigure the
> antenna materials into a single 40M dipole.  As our house lot was about 70
> feet deep, it fit perfectly North-to-South.  I used the EMT to support the
> "hot" end of the dipole but the shield-connected end of the insulated house
> wire had to touch the peak of the roof and lie on the asphalt shingles.
> This is important.
>
>       I managed to jump the four feet off the roof onto the front porch roof
> and into my bedroom window safely and ran down to the kitchen where I had
> set up my Knight-Kit T-60/R55A station.  I tuned up the T-60 (no SWR bridge
> yet so I was hoping I could get the thing to load properly) and started to
> call "CQ" again.  In between transmit attempts I tuned around my crystal
> freq with the R-55A, listening for replies.
>
>       After the third "CQ" (I logged every one of them), I heard my callsign
> coming back to me.  Due to my excitement I missed the callsign of the other
> station so I sent "QRZ?" (not bad for a Novice!) and heard my callsign
> coming back again.  This time I heard ".DE VE2AOU K."  I am quite sure I
> stopped breathing for a few seconds before I shouted, to anyone and to no
> one in particular, "I'M TALKING TO CANADA!"
>
>       I continued with the QSO, shakily copying what information I could from
> this obviously experienced and kind foreign Ham who deigned to talk with an
> American Novice and sent him my street address and town so I could make it
> easier for him to send his QSL card.  (QRZ.COM was just a glimmer in N7IKQ's
> eyes at the time, I'm quite sure.  And the Callbook was something I'd have
> to save up for for quite a long time.)
>
>       Remember that wire draped over our roof shingles?  At this point in the
> QSO I heard my mother, who had been cleaning in our second floor bedrooms,
> yell down to me, "What are you doing down there?"  Obviously, I couldn't
> disrupt my contact with a foreign Ham; I kept asking for his mailing address
> at about 5 WPM.  That's when the power to my station failed and the
> equipment panels went dark.  My mother had come into my shack (her kitchen)
> and literally pulled the plug on my first QSO.  Apparently my 60 Watts of
> Novice-frequency RF was finding its way into the second floor light fixture
> from the antenna wire only feet away on the other side of the ceiling and
> causing the ten-Watt bulb to blink on and off with my Morse transmissions.
> If I recall her words correctly, I believe she said something like, "You're
> gonna blow up the house."
>
>       I explained to her that it was just me sending signals to my first Ham
> contact - he was in CANADA, Mom!  I told her I could fix the problem (I had
> hoped.)  I found a 25 Watt bulb and installed it in place of the 10-Watter.
> I replugged my station into the wall outlet and did a quick "VVV VVV VVV DE
> WN3EWV" to prove to my mother - and to myself - that my theory of "the
> antenna wires are too close to the bulb" was correct.
>
>       A Happy Ending:  About a week later I received a QSL card from Ron Trew
> VE2AOU.  It included my full Novice callsign but misspelled first name, a
> "?" for the surname and no house number in the address.  It took me only two
> seconds to realize that one of my Elmer's (and I've forgotten his callsign
> after all these years) had worked at the local post office (18218) and
> recognized me as the likely Novice.  He made sure I got the card.
>
>       I added dipole wires for 80M and 20M to that initial 40M set and had a
> blast on the bands from home for a few years until I went away to college.
> (My first DX was on that 20M wire - G3GHB.)  Four years later I graduated
> from college with a BSEE and continued my Hamming with my first Drake
> station (TR-3CW.)  Since then I've enjoyed many, but certainly not all,
> aspects that our fine hobby has to offer.  I've made friends along the way
> and learned quite a bit of esoterica that has helped me professionally.
> (Like sunspots can wreak havoc with the electric grid or that 900 MHz and
> 2.7 GHz signals ordinarily don't travel very far.)
>
>
>      73 de
> Gene Smar  AD3F
> Rockville, MD
>
>
>
>
> ______________________________________________________________
> ARC5 mailing list
> Home:http://mailman.qth.net/mailman/listinfo/arc5
> Help:http://mailman.qth.net/mmfaq.htm
> Post:mailto:ARC5 at mailman.qth.net
>
> This list hosted by:http://www.qsl.net
> Please help support this email list:https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20210411/b91f2d4a/attachment-0001.html>