[ARC5] [Milsurplus] 100V film caps, cheap

[Mark K3MSB]

Gents

I've received numerous responses -- thank you.   Some new places to try.

When I start a restoration I try to have all the parts available at the
start.  Since I typically use 630V parts for everything, that isn't a
problem;  most of the "cottage industry"  shops that sell to restorers have
those readily available.

I think for the 611 I'm going to use what I have on hand and see how far I
get.  Might not be far, but we'll see.

73 Mark K3MSB



On Sun, May 24, 2020 at 2:50 AM Ulrich N Fierz via Milsurplus <
milsurplus at mailman.qth.net> wrote:

> G'day Mark
> have a look at
> http://www.tubesandmore.com/products/capacitor-100v-polyester-film-inductive
> , this is a type that we used in the design of mobile radios in the 70ies.
> They should be ok in the BC-611 design if you can fit them mechanically.
> The round yellow film caps tend to be more expensive, they're usually
> industrial quality.
>
> Regards, Ulrich
>
> hb9aik - vk2ani
> 8044 Zurich/Switzerland
>
>
>
>
>
>
> ______________________________________________________________
> Milsurplus mailing list
> Home: http://mailman.qth.net/mailman/listinfo/milsurplus
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Milsurplus at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20200524/01641bf3/attachment.html>