[ARC5] BC-458 and 696 parts question..

[J Mcvey]

 It shouldn't be difficult to get a decent measurement with a cut-down business card.Cut and try it in the retainer slots on the transmitter face. Then measure the height.The width can be measured on the retainer itself.

I used a plexiglass divider that comes the plastic storage drawers. It was just a tad short width-wise , but covers 95% . The height was just about perfect, slid right in!

    On Saturday, November 30, 2019, 6:34:37 PM EST, Craig via ARC5 <arc5 at mailman.qth.net> wrote:  
 
 Does anyone in the group have a good, unshriveled window for either of 
these two transmitters and would be willing to make some measurements 
and photos? I have a friend that thinks he can make a set of molds on 
his laser engraver if I can build up a set of drawings. Every unit I've 
come across in the last few years has had a distorted window, so decent 
measurements were not possible.


Thanks,

Craig

KF5JOT

Fairchild AT-21 project

S/N 42-48053

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: https://www.qsl.net/donate.html
  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20191130/ad112fd8/attachment.html>