[ARC5] CRC-7

[John Hutchins]

Possibility  a Dremil metal  cutting disk ?

On 11/24/2019 6:04 PM, scottjohnson1 wrote:
> They are spot tack welded and sweat soldered at the seams.  A hack saw 
> is the best way in.
>
>
>
> Sent from my Verizon, Samsung Galaxy smartphone
>
> -------- Original message --------
> From: Hubert Miller <Kargo_cult at msn.com>
> Date: 11/24/19 16:58 (GMT-07:00)
> To: arc5 at mailman.qth.net
> Subject: Re: [ARC5] CRC-7
>
> Did this require a soldering iron or what? I have not looked at one in 
> years, but I seem to recall the sections were soldered together?
> -Hue
>
> >I managed without too much trouble to get mine open. Must try it one 
> day, hi.
> Ben
>
> see:   https://vintageradio.webs.com/photo-gallery
>
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: https://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20191124/cfc52497/attachment.html>