[ARC5] RBB-6 Bring-Up

[Mark K3MSB]

It's alive!   It works!    Receives AM, SSB, and CW on all 4 bands.   The
controls are a bit scratchy, but some DeOxit should help that.

The biggest issue is that on the 3 lower bands,  I have to nudge the band
switch off the detent for it to receive.    Band 4 (covering 80) is fine.
The band switch then moves back and no signal.

I didn't see anything in the manual about this.   I'm thinking that I'm
going to have to remove the individual units in the RF section for cleaning
and alignment?

73 Mark K3MSB
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20190319/0c1db345/attachment.html>