[ARC5] Fwd: T23 tuning tool

[AKLDGUY .]

Hi Mike
Those nylon screws look like they might do the task straight out of the
box. The shank of my socket is 7/16" diameter and binds if there's a slight
misalignment of the slug. Those nylon screws at 3/8" head diameter would
certainly allow a little more flexibility. The brass ones are just as good
but may detune the coils due to proximity effects. Thank you for tracking
those down and for the print of the original W.E. tool from the manual.

Neil ZL1ANM


On Sun, Jun 9, 2019 at 3:40 AM Michael Hanz <aaf-radio-1 at aafradio.org>
wrote:

> Original:
>
>
>
> Lifetime supply and stocking stuffers for friends:
> https://www.mcmaster.com/95868a753
>
> If you prefer brass - https://www.mcmaster.com/93465a552
>
> Use a drill and file, or a lathe to bring down the OD to what you need.
>
> -Mike  KC4TOS
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20190609/184bad74/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: clnkljghcmjcdojm.png
Type: image/png
Size: 6092 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20190609/184bad74/attachment-0001.png>