[ARC5] IIRC Stinson?s solution to sidetone issue

[Brian Clarke]

Hello Ronnie,

 

I have an interphone AM-26 / AIC available. On the front, it has a standard Command 8-way connector, an ON / OFF switch and 4-step output level control. It lacks the standard receiver dynamotor (DM-32), but is otherwise complete. It is similar in form factor to the Command series: as wide as a transmitter, but lower and shorter than a receiver. To use it with the Command series, you would need to break the sidetone+PTT cable between the modulator and the receiver rack and wire appropriately to the 8-way cord connector.

 

As is, it weighs 1.9 kg, say 2.3 kg for shipping. You can calculate the shipping charge using the Australia Post on-line shipping calculator.

 

Presently, I’ve offered it to a Command aficionado in New Zealand. If you’re interested, I can put you as #2 on the list.

 

73 de Brian, VK2GCE.

 

On Tuesday, 12 February 2019 12:16 AM, you asked:

 

I have used Dave’s method in my SCR274N station and use that switch for “netting” and it works well!

I do however, want to install a inter phone box. Who has one they will part with?

 

W5 Sum Ugly Mug

 

Ronnie

 

“A 20wpm Extra”

Sent from my iPhone


On Feb 11, 2019, at 7:06 AM, David Stinson <arc5 at ix.netcom.com> wrote:

(Think I made the attachment too large.  Trying again)


Thanks to Brian Clarke and Mike Hanz for jogging my memory.

I reviewed the diagrams over coffee this morning to blow the dust

off the creeky stuff in my old and rapidly-emptying head.

 

<snip>

Thanks Dave.

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20190212/29f11f42/attachment.html>