[ARC5] WTB: PL-56 connectors (LM power cable)

[Robert Downs]

Roy,

 

Although the PL-*56 will plug into both the LM oscillator and LM power supply, they aren’t what was actually used.  And you also need the 3-pin+Guide connector for the AC input.  The only two PL-56’s that I have ever come across are the PL-P56 (right angle back shell with solder gland) and PL-S56 (straight back shell with cable clamp).  The original connectors were Cxx-49068-A (straight back shell with O-ring packing gland) and Cxx-49068-A (right angle back shell with O-ring packing gland).  Plus the AC input cable has Cxx-49071-A (3-pin+Guide with straight back shell and packing gland).  I am supposed to have at least one of each @ $17.50 plus shipping.

 

Robert Downs

 

From: arc5-bounces at mailman.qth.net [mailto:arc5-bounces at mailman.qth.net] On Behalf Of Roy Morgan
Sent: Monday, July 16, 2018 09:13
To: ARC5 at mailman.qth.net
Subject: [ARC5] WTB: PL-56 connectors (LM power cable)

 

ARC-5 folks,

 

I have unearthed both an LM and a power supply for it, and want to make a correct cabe to hook the two together.

 

I’ll need two PL-56 connectors.  

 

This seems to be the right angle one used at the LM - does the straight one for the other end of the cable have a different number?

 

If anyone has two of either, I’d be happy to get them.  The LM will sit atop the period-correct RAK and RAL receivers here.

 

 

Roy Morgan

k1lky68 at gmail.com

 

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20180716/a1819858/attachment.html>