[ARC5] BC-455 repair

[J Mcvey]

"Where am I going wrong?"
By removing the coil from the can?Why are you doing that? Is the RF section inoperative?In the original manual, pins 3 and 4 are the only ones used for the antenna coil.What diagram are you using?
 

    On Friday, January 26, 2018 10:29 AM, "kg4kgl at gmail.com" <kg4kgl at gmail.com> wrote:
 

  Hello all,

I am having a difficult time making sense of the wiring diagram and the actual wiring of the 455 I am attempting to repair. The RF antenna shows Z-1 connected to pins 3 & 4 and a CT to pin 5. However, when I removed the RF ant coil from the can, only pin 3 & 4 are connected. Pin 5 looks like it never had solder on it. 

Where am I going wrong?

Tnx

Robert 
KG4KGL 


Sent from my iPhone
______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


   
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20180126/0cd59f97/attachment.html>