[ARC5] Product detectors - the name.

[Fuqua, Bill L]

Marconi developed a balanced crystal detector using two crystals, a BFO which was a buzzer and a high Q tank circuit, pots and capacitors to balance out the diode capacitance and forward resistance.  Most of the circuits I have found are wrong. Some simplified incorrectly by leaving out the buzzer-tank circuit thing that it is simply a tuning aid and others that are almost right that reverse on diode. The only correct schematics are found in the patent which I can't seem to be able to find just now.


73

Bill wa4lav

________________________________
From: ARC5 <arc5-bounces at mailman.qth.net> on behalf of K5MYJ <macklinbob at gmail.com>
Sent: Thursday, May 11, 2017 9:49 PM
To: Dennis Monticelli; Kenneth G. Gordon
Cc: ARC-5 Maillist
Subject: Re: [ARC5] Product detectors - the name.

This page say the 75A-4 was manufactured in 1955:
http://www.rigpix.com/collins/75a4.htm
RigPix Database - Collins/Rockwell - 75A-4<http://www.rigpix.com/collins/75a4.htm>
www.rigpix.com
Type: HF receiver: Frequency range: 10-160 m: Mode: AM/SSB/CW: Sensitivity: N/A: Selectivity: N/A: Image rejection: N/A: Voltage: Mains: Current drain:? Impedance:? ohms


The National NC-300 (1955) and NC-303 (1958) have what appears to be a product detector (6BE6). The first grid is the LO, and the third grid is the IF input. The plate of this tube is the detector output.

Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"
----- Original Message -----
From: Dennis Monticelli<mailto:dennis.monticelli at gmail.com>
To: Kenneth G. Gordon<mailto:kgordon2006 at frontier.com>
Cc: K5MYJ<mailto:macklinbob at gmail.com> ; ARC-5 Maillist<mailto:Arc5 at mailman.qth.net>
Sent: Thursday, May 11, 2017 3:53 PM
Subject: Re: [ARC5] Product detectors - the name.

According to Osterman's book, the 75A-4 was introduced in 1958 and the NC-109 was introduced in 1957.

Dennis AE6C

On Thu, May 11, 2017 at 3:03 PM, Kenneth G. Gordon <kgordon2006 at frontier.com<mailto:kgordon2006 at frontier.com>> wrote:
On 11 May 2017 at 14:27, K5MYJ wrote:

> I just checked the manuals for the Collins 75A-3 and 75A-4.
>
> The 75A-3 was sold as an AM/CW/FM receiver. The 75A-4 was sold as an AM/SSB/CW receiver.
>
> The 75A-3 did not have what we now call a product detector.
>
> The 75A-4 had both diode(AM) and product(SSB/CW) detectors.
>
> To me the 75A-4 is the first receiver I know of to be designed for SSB.

Did that pre-date the National NC-109?

Ken W7EKB

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net<mailto:ARC5 at mailman.qth.net>

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20170512/a27911c0/attachment-0001.html>