[ARC5] ARC mini-bananna size?

[WA5CAB at cs.com]

If you have a junker -A model SCR-274-N, ARA or maybe AN/ARC-5 receiver, 
you have the makings of three plugs for the back of the ARC-5 transmitters 
from the plugs for the RF cans.  Plus three for all of the other model radios 
from the plugs for the IF cans.  You have to add the center pin.

Pomona used to sell several variants of mini-banana pins.  What you have to 
watch out for is the mounted length.  As all six of the above mentioned 
plugs are mounted from the top, the RF plug pins need to be a little longer 
than the IF pin plugs.

In a message dated 03/28/2017 15:29:48 PM Central Daylight Time, 
arc5 at mailman.qth.net writes: 
> I bought some 'miniature bannna plugs" that  were 3.04 mm diameter, but 
> they don't mate snugly with the ARC jack.
> Must be some odd size -?
> 
> 
> What is the correct size and where do I find them?
> Also,I would like to find ( at minimum) the male connectors for the ARC-5 
> type transmitter ( larger than SCR-274).
> Better yet, a MT-71 tx rack...
> 
> 
> Jim
> 

Robert & Susan Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20170331/93ad9176/attachment.html>