[ARC5] Rollerductor setting

[Dennis Monticelli]

Neil,

Whether 80M or 40M, I like to adjust for at least half the rollerductor.
Too little inductance will compromise harmonic attenuation.

Dennis AE6C

On Wed, Apr 19, 2017 at 7:12 PM, AKLDGUY . <neilb0627 at gmail.com> wrote:

> To match my T-19/ARC-5 (3-4 Mc/s) to 50 ohm coax, I'll be using a 150pF
> variable capacitor connected in series with the inner of the coax.
>
> This configuration worked very well with my BC-AO-230 with the cap at
> about half-mesh.
>
> What setting should I use for the ANT. INDUCTANCE?
> Frequency is 3.850 MHz for the ZL AM net.
>
> 73 de Neil ZL1ANM
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20170419/943ea2bb/attachment-0001.html>