[ARC5] SG Keying of ARC-5 Tx

[K5MYJ]

Remember the ARC-5 family was not really designed for CW operation. And any 
CW done on these transmitters was SLOW!

Bob Macklin
K5MYJ
Seattle, Wa.
"Real Radios Glow In The Dark"
----- Original Message ----- 
From: "Kenneth G. Gordon" <kgordon2006 at frontier.com>
To: "Mike Everette" <radiocompass at yahoo.com>
Cc: <ARC5 at mailman.qth.net>
Sent: Sunday, November 20, 2016 3:28 PM
Subject: Re: [ARC5] SG Keying of ARC-5 Tx


> On 20 Nov 2016 at 1:14, Mike Everette wrote:
>
>>
>> Why not use the original "selector" circuit with the underchassis relay, 
>> which keys
>> the oscillator plate and amplifier cathode?
>
> Because in every single one of the transmitters I have here, that relay 
> and all the wiring to it
> is gone.....in addition to many other parts...
>
>> Be sure the section of the .05 uF capacitor used as a bypass in the 
>> oscillator
>> plate feed is good!
>
> Good point, thanks.
>
> Ken W7EKB
>
>
> ---
> This email has been checked for viruses by Avast antivirus software.
> https://www.avast.com/antivirus
>
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html