[ARC5] Restoring a BC-455-b, request advices

[Dennis]

You can test for leakage at different voltages easily.  Remove the attachment screw of the can-to-chassis and slip a business card between the can and chassis, then apply voltage via a current meter.

Another easy test is to apply low B+ to the entire radio.  If the caps are not leaking at 60V you will measure about 10mA draw.

Dennis AE6C

Sent from my iPhone

> On May 1, 2016, at 1:09 AM, Paolo Gramigna <admin at controllo.it> wrote:
> 
> Hi all,
> I'm a newcomer here. I just acquired a complete (less dynamotor) and good-looking BC-455-B and I would like to restore it to good working conditions. I'm planning to use it in order to listen to the few remaining broadcasting stations, while enjoying the sound of a truly vintage radio.
> 
> I have seen several posts in the web suggesting to replace the capacitors, especially the electrolytic ones, with modern ones. That will cause big detriment to the authenticity, but probably will be beneficial to the functionality.
> 
> What is your wise advice?
> 
> thanks!
> 
> IK4YNG Paolo
> ______________________________________________________________
> ARC5 mailing list
> Home: http://mailman.qth.net/mailman/listinfo/arc5
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:ARC5 at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html