[ARC5] BC-230 first run

[tbs50a at aol.com]

Hi Guys,
I'm rooting for yous. Bought one of those a few years back when
Dave was experiment with using the 6C4's in it. Got a pair of
coils for it but neither are dead on the 80 or 40mtrs.
Have also got a couple big Philco console that have 6A3's
in the audio output and was thinking these might be fun to play with.

GL
Terry N3GTE

 

 

 

-----Original Message-----
From: David Stinson <arc5 at ix.netcom.com>
To: AKLDGUY . <neilb0627 at gmail.com>; ARC-5 List <arc5 at mailman.qth.net>
Sent: Sun, Mar 27, 2016 8:45 am
Subject: Re: [ARC5] BC-230 first run

Inspect the coil connection posts.  Hard to get to
the backs of them but not impossible.  Make sure 
they connect where they should, especailly ground points.

Are the 6AQ5 screens connected to plate or grid?
Must go to plate.

Jumper the RF Ammeter. Open thermocouple is
another common problem. 

If not any of these, I'll get my manuals and
start scratching my head.





______________________________________________________________
ARC5 mailing list
Home: http://mailman.qth.net/mailman/listinfo/arc5
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:ARC5 at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20160327/9fb086a5/attachment.html>