[ARC5] [BoatAnchors] TCS Receiver Resurrection Tips. (LONG)
WA5CAB at cs.com
WA5CAB at cs.com
Fri Jan 22 11:40:05 EST 2016
FWIW, the only change to the IF transformers and BFO transformer occurred
at TCS-8. TCS through TCS-7 (and 51Q and 56Q) use air core transformers with
trimmer capacitors. TCS through TCS-15 use slug tuned iron core
transformers. If you have a receiver with a TCS-13 nameplate and air core IF
transformers, either someone replaced all of them with the earlier type or more
likely, someone put a TCS-13 nameplate on an earlier model. Does it have three
handles on the front panel or a round-nose post in each corner?
In a message dated 01/22/2016 00:26:17 AM Central Standard Time,
boatanchors at theporch.com writes:
> If you don't have a manual copy, you need
> to get one. It's invaluable, especially for the alignment
> procedure. While the receiver I'm working on is
> a TCS-13 and my manual is TCS-12, and there are
> minor differences in where some wires go
> and in the types of IF cans used, these are
> minor annoyances.
Robert Downs - Houston
wa5cab dot com (Web Store)
MVPA 9480
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/arc5/attachments/20160122/873b62dd/attachment.html>
More information about the ARC5
mailing list